Detail & Scale Header
Digital Publications Link
Aviation Photo Section Link
Scale Modeling Section Link
Aviatin Artwork Link
Furball Aero Design / Detail & Scale Decals
About Us Link
Contact Us Link
Home Page Link

Detail & Scale Books

Quick Links to Available Detail & Scale Series Publications.


Detail & Scale Series


F3H Demon in
Detail & Scale
**********F9F Cougar in Detail & Scale
Revised Edition

**********
F2H Banshee in
Detail & Scale, Pt. 1

**********

SBD Dauntless in
Detail & Scale

**********




F-102 Delta Dagger in Detail & Scale
**********

F4F & FM Wildcat in Detail & Scale
**********

F-8 & RF-8 Crusader in Detail & Scale
**********

F/A-18E &
F/A-18F Super Hornet in Detail & Scale

**********

F6F Hellcat
in Detail & Scale

**********

F-100 Super Sabre
in Detail & Scale

**********

Military Aviation Websites:
Click Here

——————

Scale Modeling Websites:
Click Here



KIT REVIEW


Eduard Albatros D.V Weekend Edition -- 1:48 Scale


Within the span of a mere 15 years, aircraft design and engineering evolved considerably from the Wright Flyer to deadly combat aircraft.  Yet, the optimal balance between structures, powerplants, weight, and aerodynamics was still an experimental affair.  The German family of Albatros D-fighters was good example of this.  It was the most numerous of any German fighter lineage in the Great War (4800+ built).  They were ace-makers – and they looked dangerous with its sleek, bullet-shaped fuselage and low tail.  Yet, they were dangerous in other ways, suffering from a common Achilles Heel:  catastrophic wing failures.  In this recent release, Eduard has re-popped their 1:48 scale injection-molded Albatros D.V from their original 1995 new tool kit as a Weekend Edition kit.  Let’s check it out.

(Return to top of page)

By early 1917, it was clear to the German military and engineers at Albatros Werke that their D.III was not only becoming obsolete in light of the newest Allied fighters, but under high-g loading and prolonged dives, the lower wing would twist and fail.  In response, the D.V was proposed and flew in April 1917.  It used the same Mercedes D.IIIa 170 hp powerplant pushing its top airspeed to about 116 mph, but its fuselage was fully elliptical in cross-section, featured a larger rudder, and a slightly revised and strengthened sesquiplane configuration.  It was armed with a pair of 7.92mm machine guns synchronized to fire through the prop.

The D.V entered service in May 1917 and structural failures of the lower wing occurred with increasing frequency.  Upper wing cracks also plagued the airplane.  Many pilots, including Manfred von Richthofen, preferred the D.III as the D.V was physically taxing to fly in addition to its maneuvering limitations.

The D.Va was developed in response and incorporated stronger wing spars, heavier wing ribs, a reinforced fuselage, and more powerful and heavier engine to offset as much of the newly added weight penalties.  Still, wing failures continued.  At the same time, structural issues plagued the Fokker Dr.I and the less-than-stellar performance of the Pfalz D.III left the Germans with no alternative to the D.Va for another year until the Fokker D.VII came on the scene.  Production of the D.Va closed in April 1918 following a production run of 700 D.Vs and 1,612 D.Va airframes. 

(Return to top of page)

Eduard’s 1:48 scale D.V Weekend Edition kit comes on two injection molded polystyrene sprues containing 60 parts.  The full color instruction booklet organizes the build over six pages.  Markings are included for two airplanes: 

Strengths:  This kit might be based on an “old” mold by Eduard, but its still quite impressive.  They did good work back then, too!  The kit itself is simple and I find it to be accurate.  There are not a lot of parts, fit is quite good, and surface detail is excellent.  This includes really nice recessed panel lines on the fuselage.  There’s a pilot figure, too, but the instructions suggest not using him.

Even though it’s a Weekend Edition kit with only two schemes, you've got some awesome markings options.  They are both outstanding choices for the scale modeler.  You will have a hard choice figuring out which scheme to do, but Veltjens’s Jasta 18 D.V draws my attention most.  The decals appear to have been printed in-house by Eduard, and they all look great.  I can see no technical errors in printing.

Weaknesses:  I cannot offer any substantive critiques of this kit.  One minor issue was that in our sample, there’s a pretty deep sink mark in the upper torso of the pilot figure that will need to be filled – but only if you go against the instructions and wish to use the figure!

(Return to top of page)

Eduard continues to get mileage out of their solid 1995-era Albatros D.V kit.  Fans of WWI subject matter will certainly enjoy this issue of the kit, and its relative simplicity, nice detail, and markings options extend a broad invitation to a wide range of scale modelers.

Sincere thanks are owed to Eduard for the review sample.  You can visit them on the web at http://www.eduard.com and on Facebook at https://www.facebook.com/EduardCompany

Haagen Klaus
Scale Modeling News & Reviews Editor
Detail & Scale

(Return to top of page)

** Click on the thumbnails below to view a larger image.**


(Return to top of page)

Our Most Recent Release!



F-100 Super Sabre in Detail & Scale

Detail & Scale Special Edition Books


U. S. Navy and Marine Carrier-Based Aircraft of World War II
********



JET FIGHTERS
OF THE U. S. NAVY AND MARINE CORPS
PART 1: THE FIRST TEN YEARS
********

Attack on Pearl Harbor, Japan Awakens a Sleeping Giant

********


Colors & Markings Series


Colors & Markings of U. S. Navy
F-14 Tomcats,
Part 1: Atlantic
Coast Squadrons
********


Colors & Markings of the F-102
Delta Dagger

**********

Colors & Markings of U. S. Navy
F-14 Tomcats,
Part 2: Pacific
Coast Squadrons

**********