Detail & Scale Header
Digital Publications Link
Aviation Photo Section Link
Scale Modeling Section Link
Aviatin Artwork Link
Furball Aero Design / Detail & Scale Decals
About Us Link
Contact Us Link
Home Page Link

Detail & Scale Books

Quick Links to Available Detail & Scale Series Publications.


Detail & Scale Series


F3H Demon in
Detail & Scale
**********F2H Banshee in
Detail & Scale, Pt. 1

**********
SBD Dauntless in
Detail & Scale

**********

F-102 Delta Dagger in Detail & Scale
**********

F4F & FM Wildcat in Detail & Scale
**********

F-8 & RF-8 Crusader in Detail & Scale

**********

Military Aviation Websites:
Click Here

——————

Scale Modeling Websites:
Click Here




Scale Model Photo Set


A-36 APACHE 1/72nd SCALE M News KIT

MODEL DATA:

Subject: A-36 Apache of the 27th Fighter Bomber Group, Gela, Sicily, 1943.

Kit:      M News

Scale:  1/72nd

Decals: Kit Decals

Builder: Bert Kinzey

NOTES:

One of the first releases by M News, a company in the Czech Republic, was this limited production 1/72nd scale model of the A-36 Apache, the dive bomber variant based on the early P-51 line of Mustangs that were powered by Allison engines.  The model is rather crude, and the parts are covered with flash.  It is poorly engineered, and at first glance, it might not seem worth building.  But the shapes are generally correct, and surprisingly, the panel lines are engraved.  This allows for considerable sanding, which is necessary during construction.

The flash makes many of the small parts unusable, and this is probably just as well, because most of them are crude and inaccurate.  We decided to build this kit using only the fuselage halves, the tops and bottoms of the wings, the rudder, horizontal stabilizers, spinner, and propeller.  Almost all of the other parts, to include the landing gear, exhausts, cockpit interior, radio antenna mast, pylons, and hot air ramp were taken from a Hasegawa P-51B kit.  Bombs came from a Monogram P-51B, while the chin-mounted guns came from the spares box.  The pitot probe was made from a straight pin, and the clear cover for the dual landing/taxi lights was made from a piece cut from a clear toothbrush.

During basic construction, we cut the main gear wells out of the lower wing of the Hasegawa kit.  With some trimming, we got this to fit inside the wings of the M News kit.  This added some depth to the shallow Hasegawa wells.  While the reworked wells still were not quite deep enough, they certainly were not as shallow as molded in the Hasegawa kit.  This can be seen in the last photograph in this photo set.  We also added the Hasegawa hot air ramp to the underside of the fuselage, and we used the Hasegawa tail wheel in place of the one provided in the M News kit.  Inside the cockpit, we used several of the parts from the Hasegawa kit as well as making other details from scratch.

The cooling air scoop does not have the small dip in the center of the upper lip, this is easy to correct with some scrap plastic.  Before gluing the wings together, we cut the flaps from the top wing panels.  The groove at the leading edge of each flap was filled and sanded, and then they were set aside to be added later.

The fit is average at best, so considerable filling and sanding is necessary.  The holes for the guns are not in the wings so they must be drilled out.  No landing/taxi lights are provided.  The best way to add this obvious feature is to cut a notch at the correct place in the leading edge of the left wing.  Epoxy a piece of clear plastic cut from a clear toothbrush into this notch.  Once the epoxy has set, sand the clear piece to shape, then polish it out.

With a little trimming, the thin, clear, Hasegawa canopy can be made to fit this kit, thus replacing the thicker and rather cloudy one that M News provides.

With the Hasegawa main wheel wells mounted inside the M News wing assembly, it is a simple matter to use the Hasegawa main gear struts, doors, and wheels.  The monogram bombs fit the Hasegawa pylons with only a little trimming.

Simply stated, this kit will not produce an acceptable model built straight from the box.  But by following the steps outlined here, it can be turned into a very nice model.  We were very pleasantly surprised how well the finished A-36 model turned out, given what the kit looked like when we opened the box. 

A photo of this model and a review of the kit appeared in “P-51 Mustang in Detail & Scale, Part 1, Prototype through P-51C.”  A photo of the actual aircraft appears on page 23 of the book.

(Return to top of page)

** Click on the thumbnails below to view a larger image.**


 

(Return to top of page)

Just Released!

JET FIGHTERS
OF THE U. S. NAVY AND MARINE CORPS
PART 1: THE FIRST TEN YEARS
*********

Detail & Scale Special Edition Books

U. S. Navy and Marine Carrier-Based Aircraft of World War II
*********


Attack on Pearl Harbor, Japan Awakens a Sleeping Giant

********


Colors & Markings Series



Colors & Markings of U. S. Navy
F-14 Tomcats,
Part 1: Atlantic
Coast Squadrons
********


Colors & Markings of the F-102
Delta Dagger

**********


Colors & Markings of U. S. Navy
F-14 Tomcats,
Part 2: Pacific
Coast Squadrons

**********